Death Guard Land Raider project – The Disco Tank, part 3

If you’ve just arrived with this Land Raider, then you’ve missed parts one and two, which detail how I’ve decorated the inside of the vehicle. With the rough base coats done for all of the tank bar the smaller detailed areas, it was time to start on the washes. Below you can see some parts… More Death Guard Land Raider project – The Disco Tank, part 3

Death Guard Land Raider project – The Disco Tank, part 2

Welcome to part 2 of the Death Guard Land Raider project. If you’ve not seen part one, you can see that here. The main ‘plan’ now was to get the interior painted up. The seats were painted with Vallejo Russian Uniform WW2, while the engine was painted up with Citadel’s Skullcrusher Brass and Leadbelcher, and… More Death Guard Land Raider project – The Disco Tank, part 2

Death Guard Land Raider project – The Disco Tank

When Dark Imperium was released last year, I was blown away by the Death Guard miniatures, and I started collecting Death Guard for Warhammer 40k. This in turn led me to Maggotkin of Nurgle for Warhammer Age of Sigmar, and between the two of them, I amassed a lot of Nurglings. Now reading through the… More Death Guard Land Raider project – The Disco Tank

Mortarion – Daemon Primarch of Nurgle, part 7

It’s here! It’s finally here! The final, seventh slice of Mortarion. As I write this, he’s actually been finished for just over a month, but I’ve been working on other things and trying to get some interesting and different posts done – I’m sure there’s only so much Nurgle a site can hold. The Wings… More Mortarion – Daemon Primarch of Nurgle, part 7

Video ‘How to: Paint Poxwalkers’

In this video I’ll be talking through a quick and easy method of painting up Pox Walkers to get them looking great on your tabletop. While you’re here, why not subscribe to the channel so you won’t miss any of our future content? Facebook: https://www.facebook.com/brushandboltgun/ Instagram: https://www.instagram.com/brushandboltgun/ Twitter: https://twitter.com/Brushandboltgun Paints Used: Vallejo Model Air Rust… More Video ‘How to: Paint Poxwalkers’

Mortarion – Daemon Primarch of Nurgle, part 6

Well it’s been a fair while since I picked up Mortarion, nearly four months in fact, the last post being the 28th January. With the March to War in full swing at that point, all my efforts were focussed there, and the amount I felt I had to do on Mortarion left me a little… More Mortarion – Daemon Primarch of Nurgle, part 6

Video ‘How to: Paint Foul Blightspawn

In this video I’ll be talking through how I painted up a Death Guard Foul Blightspawn from start to finish. Each of the methods is very simple, but it gives a great overall effect for your miniature. Paint list below video. For this tutorial you will need the following: Paints Used: Vallejo Model Air Rust… More Video ‘How to: Paint Foul Blightspawn

Mortarion – Daemon Primarch of Nurgle, part 5

It’s been a bit of a break from Mortarion, and the Death Guard as a whole really, but I’m back on the horse and ready to carry on with him. I think the miniature itself was a little intimidating. It’s so big it takes an age, and the thought of continuing, knowing I have the… More Mortarion – Daemon Primarch of Nurgle, part 5

Death Guard Deathshroud Bodyguards – Part 2

Part one of this post can be found here. Since we had all the shades done at the end of part one, I started on the longest part of painting Death Guard in this way, the armour. I used a mix of watered downWhite and Citadel Ushabti Bone. Next came the corrosion. As these are pretty… More Death Guard Deathshroud Bodyguards – Part 2

Death Guard Deathshroud Bodyguards – Part 1

As with all the Death Guard miniatures that have come out this year, I snaffled up the Deathshroud Bodyguards as soon as they landed. When they arrived I was both made up with them, and perplexed, as I thought they’d have more poses and options, but it doesn’t actually matter, because the models you can… More Death Guard Deathshroud Bodyguards – Part 1

Video ‘How to: Paint a Death Guard Biologus Putrifier’

In this week’s video, I’ll be taking you through a step by step method of painting up the Biologus Putrifier for your Death Guard army. I’ve linked some relevant links and posts below, so feel free to check them out. Related videos; Weathering and Corrosion – https://youtu.be/_YExtR-RUbM How to: Paint Glass Bottles – https://youtu.be/fOsXPshvzU0 Related… More Video ‘How to: Paint a Death Guard Biologus Putrifier’

Mortarion – Daemon Primarch of Nurgle, part 4

This week I continued from where I left off, on the base. I started by painting all the pustules and boils with a mix of Citadel Averland Sunset and Vallejo White, before adding Citadel Carroburg Crimson shade around these areas. I also added Carroburg Crimson to the areas surrounding the tears in the flesh/stone. I… More Mortarion – Daemon Primarch of Nurgle, part 4

Mortarion – Daemon Primarch of Nurgle, part 3

As I was saying in part 2, my initial plan to paint this in stages came unstuck because of how the model goes together, so my usual order of painting went out the window. This week, I’ve mainly been painting up the base and going over his cloak. At the end of part 2, his… More Mortarion – Daemon Primarch of Nurgle, part 3

Video ‘How to: Paint Typhus, Herald of Nurgle’

In this week’s video, we’ll be painting up the Death Guard’s one and only Typhus, Herald of Nurgle. Paints Used:- Vallejo Model Air Rust Vallejo Model Air Steel Vallejo Model Colour White Vallejo Russian Uniform WWII Vallejo Model Colour Basic Skintone Vallejo Model Colour Dark Seagreen Vallejo Model Colour London Grey Citadel Xereus Purple Citadel… More Video ‘How to: Paint Typhus, Herald of Nurgle’

Mortarion – Daemon Primarch of Nurgle, part 1 – Legs

With all the new Death Guard stuff kicking about, there was no chance I was going to miss out on Mortarion, and I pre-ordered the big lug on the first day. You may remember we did the Guilliman hobby challenge, painting up the newly returned primarch (final update here), and I thought initially that he… More Mortarion – Daemon Primarch of Nurgle, part 1 – Legs

Death Guard painting techniques, part 2

If you haven’t checked it out yet, part 1 of the Death Guard painting techniques can be found here and contains more techniques in for painting up your Death Guard miniatures. 1, Brass trim, bells, etc The brass on these miniatures is really easy to get looking good, and I’ve used this on each of my… More Death Guard painting techniques, part 2

Death Guard painting techniques, part 1

I’ve done a fair few Death Guard posts and videos, as everything is new and shiny at the moment, and there’s a lot of interest in how people are painting them, as there are a multitude of different styles and methods out there. While I give overall step by step posts, there’s never specific breakdowns… More Death Guard painting techniques, part 1

How to: Paint a Death Guard Bloat Drone Part 2

If you’ve not read Part 1 yet, it’s here, and it will bring you up to speed on how to get to the start of this one. Where to start with the final part? The base. The plastic bases that Games Workshop make are pretty decent, and really easy to paint up so that they… More How to: Paint a Death Guard Bloat Drone Part 2

How to: Paint a Death Guard Bloat Drone part 1

The Bloat Drone from the Dark Imperium box was one of the most revolting miniatures I’ve seen in a while. It’s battered armour plates, corroded and mottled spikes, and bloated and sagging skin give the model an overall hideous look. If the Emperor does indeed protect, he’ll hopefully see his way clear to swatting them… More How to: Paint a Death Guard Bloat Drone part 1

Video "How to: Paint gore and open wounds on Death Guard, Pox Walkers and Zombies

Following on from the post a few weeks back, this video shows the whole process start to finish on two miniatures, a pox walker from the Dark Imperium box, and a zombie (05:48) from the Mantic Games Walking Dead: All Out War box. If you have any thoughts please comment below, and please consider following… More Video "How to: Paint gore and open wounds on Death Guard, Pox Walkers and Zombies

Video "How to: Death Guard corrosion and weathering"

If you follow us on Instagram, here, or on youtube you’ll know that I’m bang into Death Guard at the moment. One of the things I wanted to do was get them al looking shabby and weathered, like caring for their armour was the last thing on their mind. I wasn’t sure how to go… More Video "How to: Death Guard corrosion and weathering"