Death Guard Land Raider project – The Disco Tank, part 3

If you’ve just arrived with this Land Raider, then you’ve missed parts one and two, which detail how I’ve decorated the inside of the vehicle. With the rough base coats done for all of the tank bar the smaller detailed areas, it was time to start on the washes. Below you can see some parts… More Death Guard Land Raider project – The Disco Tank, part 3

Death Guard Land Raider project – The Disco Tank, part 2

Welcome to part 2 of the Death Guard Land Raider project. If you’ve not seen part one, you can see that here. The main ‘plan’ now was to get the interior painted up. The seats were painted with Vallejo Russian Uniform WW2, while the engine was painted up with Citadel’s Skullcrusher Brass and Leadbelcher, and… More Death Guard Land Raider project – The Disco Tank, part 2

Drach’nyen – Abaddon the Despoiler’s Demon Sword

About four or five years ago, I was collecting a small force of Red Corsairs because I really liked the fluff, and Huron Blackheart was a complete fiend. Eventually I grew a little weary of the colours – I’d painted a lot of red in the past, and I didn’t feel that the Huron miniature… More Drach’nyen – Abaddon the Despoiler’s Demon Sword

Mortarion – Daemon Primarch of Nurgle, part 7

It’s here! It’s finally here! The final, seventh slice of Mortarion. As I write this, he’s actually been finished for just over a month, but I’ve been working on other things and trying to get some interesting and different posts done – I’m sure there’s only so much Nurgle a site can hold. The Wings… More Mortarion – Daemon Primarch of Nurgle, part 7

Video ‘How to: Paint Foul Blightspawn

In this video I’ll be talking through how I painted up a Death Guard Foul Blightspawn from start to finish. Each of the methods is very simple, but it gives a great overall effect for your miniature. Paint list below video. For this tutorial you will need the following: Paints Used: Vallejo Model Air Rust… More Video ‘How to: Paint Foul Blightspawn

Video ‘How to: Paint Death Guard Plague Knives’

In this short tutorial, I’ll be demonstrating a quick and easy method of painting up the Death Guard Plague Knives. The same method can be used for pretty much all Death Guard weapons. It has been covered in a number of the other tutorials, but this is entirely focussed on getting the plague knives looking… More Video ‘How to: Paint Death Guard Plague Knives’

Video ‘How to: Paint a Death Guard Tallyman’

In this video I’ll be talking through how I painted up a Death Guard Tallyman from start to finish. Each of the methods is very simple, but it gives a great overall effect for your miniature. For this video I used: Paints: Vallejo Model Air Rust Vallejo Model Air Steel Vallejo Model Colour White Vallejo… More Video ‘How to: Paint a Death Guard Tallyman’

Video ‘How to: Paint Typhus, Herald of Nurgle’

In this week’s video, we’ll be painting up the Death Guard’s one and only Typhus, Herald of Nurgle. Paints Used:- Vallejo Model Air Rust Vallejo Model Air Steel Vallejo Model Colour White Vallejo Russian Uniform WWII Vallejo Model Colour Basic Skintone Vallejo Model Colour Dark Seagreen Vallejo Model Colour London Grey Citadel Xereus Purple Citadel… More Video ‘How to: Paint Typhus, Herald of Nurgle’

Death Guard painting techniques, part 1

I’ve done a fair few Death Guard posts and videos, as everything is new and shiny at the moment, and there’s a lot of interest in how people are painting them, as there are a multitude of different styles and methods out there. While I give overall step by step posts, there’s never specific breakdowns… More Death Guard painting techniques, part 1

Video ‘How to: Paint Sons of the Cyclops’

In todays video, we’ll be giving a short tutorial on how to paint a sorcerer for the Sons of the Sorcerer warband, who are part of the Black Legion. This is using the Ahriman miniature from the Burning of Prospero boxed game. If you have any thoughts please comment below, and please follow us on… More Video ‘How to: Paint Sons of the Cyclops’

How to: Paint a Death Guard Bloat Drone part 1

The Bloat Drone from the Dark Imperium box was one of the most revolting miniatures I’ve seen in a while. It’s battered armour plates, corroded and mottled spikes, and bloated and sagging skin give the model an overall hideous look. If the Emperor does indeed protect, he’ll hopefully see his way clear to swatting them… More How to: Paint a Death Guard Bloat Drone part 1

Video "How to: Paint corroded weapons"

Following on from the Pox Walker infections video, this video shows how to paint the corroded blades on the Death Guard miniatures, so that they look old and battered. I’ll be adding another soon with the Pox Walker blades, which I paint as heavily rusted.     While you’re here, please consider following us on… More Video "How to: Paint corroded weapons"